|
|
|
 |
Traffic Spikes / Tiger Teeth / Cobra Factory Authorized Distributor for RoadBlade, PMG, Magnetic Autocontrol, and DoorKing, DKS. Competitive pricing. Worldwide distributor for Road Shark™ and RoadShark™ Traffic Spikes. Checkpoint TRAP (temporary roadblock apparatus pack) and permanent tire shredders. Feel safer with one-way traffic spike systems, road traffic control systems, retractable tire traffic spikes, (1610, 1615, 1601, 1602, 1603, auto-spike), super heavy duty traffic spikes, RB-36 traffic spikes, RB-36LD latch-down traffic spikes, Cobra traffic spikes, Cobra II traffic spikes, StingRay traffic spikes, Enforcer traffic spikes, RoadShark™ traffic spikes, spike strips for both in-ground and on-ground directional treadle systems for in-bound and out-bound pneumatic tires. We sell at discount to apartment complexes, shopping center, malls, airports, military bases/installations, factories and businesses to protect parking lots, employee, security, and public access, private and commercial property. Traffic Spikes can be your guardian. Tire poppers are one-way, two-way, above ground, on ground, flat mount, flush mount, or surface mount... hydraulic options.
|
|
|
 |
|
|
|
|
|
|
WaterJet (Water Jet) Complex Cutting Service & Machine Shop in Tucson, Arizona
|
|
|
|
The traffic spike products that we design and manufacture are made using the highest quality of cutting tool... an abrasive cutting water jet.
With the OMAX abrasive waterjet we can provide complex cutting of virtually any material. This state-of-the-art waterjet technology offers flexibility and fast turn-around from prototype to production. Rapid-prototyping and waterjet production runs from small to large are available.
|
|
|
|
Materials Cut
Each OMAX waterjet JetMachining Center is designed to easily cut an array of materials and thickness, from stone, metal, plastic and glass, to rubber, ceramics and composites. Currently, precision waterjet cutting applications involve metals such as aluminum, tool steel, stainless steel, mild steel and titanium, all materials commonly used in many engineering applications, with the ability to quickly and accurately waterjet cut machine nearly any two-dimensional shape imaginable in thickness up to 9".
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
The waterjet will cut metal, glass, composite, ceramic, exotic alloys, stone, rubber and wood with ease. Sophisticated cuts and very thick sections may be cut with tight tolerances.
Ideal to the waterjet are projects that involve art (artistic) pieces, as well as aerospace parts and custom gears.
|
|
|
|
Standard Features
- OMAX Intelli-MAX® software offers higher average cutting speeds and greater precision with free upgrades for the life of the machine
- Programmable Motorized Z-Axis with precision OMAX MAXJET®5i Nozzle Assembly
- Ball screw drive inside the Y-axis bridge fully enclosed inside bellows
- Intelli-TRAX traction drive inside the X-axis beams fully enclosed inside coated steel covers
- Scissor-style hard plumbing
- Component protection against water, dirt, and grit
- High efficiency direct drive pump systems available in 30, 40, 60,70 and 80 hp with pressures up to 55,000 psi
- Rapid Water Level Control for quiet and clean submerged cutting
- Bulk Abrasive Feed Assembly transports garnet from the assembly's large hopper into the small hopper located at the Z-axis
- Solids Removal System (SRS) designed for tough industrial use (available as an option)
Abrasivejet Benefits
- Machines a wide range of materials and thicknesses
- Does not create heat-affected zones or mechanical stresses
- Rapid setup, no tool changes required
- Minimal fixturing required
- Leaves behind a satin-smooth edge, reducing secondary operations
- No noxious gases, liquids or oils used in (or caused by) the machining process
- Completes most work below 80 dBA at 1 meter for submerged cutting
- Environmentally green system with quiet and clean operation, low electrical and abrasive consumption
|
|
|
|
Typical Applications
Job Shops: Produce a wide variety of short-run parts
Wire EDM Shops: Save valuable machine time where ±0.001" is acceptable (OMAX Model 2626|xp) or where ±0.005" is acceptable (all other OMAX models)
Laser Shops and Aerospace Industry: Work with materials that are affected by heat (such as titanium, and aluminum) or materials that laser can not cut (such as thicker metal or composites)
Prototype and R&D Shops: Work directly from CAD drawings
Maintenance and Repair Shops: Quickly produce one-off parts
Original Equipment Manufacturers: Control Just-in-Time inventory requirements
Metal Fabricators: Offer "clean edge" plate work, such as brackets, machine parts and weldments
Architectural Fabricators: Lets you create complex designs in glass, stone, tile and metal Abrasivejet
Waterjet Specialty Shops: Makes parts with higher tolerance than any other abrasivejet system
Industrial Manufacturers: Minimize scrap when working with expensive materials
|
|
|
|
Some other typical users of abrasivejet technology:
Job shops
Job shops produce a wide variety of short-run parts. OMAX's ability to create tool paths quickly and easily let job shops effectively compete even on small runs of parts. AbrasiveJet machining complements CNC milling machines and flame cutters.
Wire EDM shops
The OMAX JetMachining Center works well in wire EDM shops. The OMAX is faster than wire EDM (up to 10 times faster). It can also cut both conductive and non-conductive material. In addition, there is no heat-affected zone.
Laser shops
Laser shops can capitalize on abrasivejet's ability to cut thicker materials than lasers can deal with. In addition, abrasivejets can cut reflective materials and other materials not suitable for laser cutting.
Aerospace shops
Machine shops that work with the aerospace industry use abrasivejets to work with materials that are affected by heat, such as titanium and aluminum. Aluminum is particularly easy to machine with abrasivejets because it is soft and easily (and quickly) cut.
Tooling shops
Because the OMAX JetMachining Center can work with hardened tool steel, it is frequently the tool of choice in tooling shops.
Prototype and R&D shops
The OMAX software supports standard DXF images, which makes it easy to import files from other CAD programs (such as AutoCAD). This allows for rapid creation of a toolpath, which leads to quick part creation. It's also easy to make changes to the part and create a new tool path.
Maintenance and repair shops
The OMAX is ideal for creating replacement parts quickly. When a part is needed in a hurry, repair shops use the OMAX to make one out of any of wide variety of materials.
Manufacturers
Manufacturers use the OMAX to control Just-In-Time inventory requirements.
Metal fabricators
Metal fabricators appreciate the clean edge plate work offered by the OMAX.
Architectural fabricators
Whether it's a large sign for a restaurant, decorative tiles, or intricate design work, the OMAX can create it in a wide variety of materials.
|
|
|
All content is copyright protected by Monsoon Manufacturing LLC. Nite-BiteTM is a trademark of Monsoon Manufacturing LLC and has a patent pending through provisional patent filed with the United States Patent Office. RoadShark™ and TrafficSpyker™ are brands of traffic safety equipment in the USA (™ by Monsoon Manufacturing LLC)
We reserve the right to alter design specifications without prior notification (we upgrade finishing techniques and manufacturing processes as they become available).
Disclaimer: All sales are final. Contact the webmaster at: Jeff@TrafficSpikesUSA.com
|
|
|
